FIRE DESTROYER STICKER
122.00 € WITH TAX (100.00 € WITHOUT TAXES)
GB 50370-2005
GB 7258-2017
GB 50263-2007
CE
Dimension: 95mm x 60mm
Net weight of extinguishing medium: 12g
Gross product weight: 90g
Extinguishing power: 0.12m3
Main oxidant and content 35%～50%Sr(NO3)2 10% ~ 20%KNO₃
Activation at: ≥170℃
Reaction time: ≤ 6 s
Temperature range: -50℃ ~ +110℃;
Fire extinguishing density: 100 g/m3;
Discharge outlet temperature: ≤160℃
Shell surface temperature after spraying: ≤150℃
Shelf life: 4 years
The FIRE DESTROYER sticker is therefore suitable for the following cases of use:
- generator room,
- distribution box / room,
- transformer cabinet / room,
- compressor room,
- engine room,
- energy cabinet,
- cable intermediate layer,
- cable shaft / ditch,
- charging station,
- communication base station / machine room,
- electronic computer room,
- places with special instruments and equipment, etc.
Shelf life 4 years.
Share with friends
Safe purchase
Money back guarantee
Fast delivery
FIRE DESTROYER NALEPKA - majhna in povsod dostopna!
Due to its shape and size, the FIRE DESTROYER sticker is intended for installation in extremely narrow spaces in the building.
Usage
Dimensions
Safety
Causes of fire:
old, worn-out fuses
Unprofessional connection
Network congestion
Poor material quality
Overheating
Dirt
Mechanical damage
Damage from rodents
Mechanism 3-5 seconds
Upon contact with fire, the mechanism will be triggered within 3-5 seconds and disperse the extinguishing medium around the room.
assembly
Estimated assembly time is 15 minutes.
The power of the medium
The power of the media in the DISK FIRE DESTROYER is sufficient for extinguishing a room up to 1m3.
Maintenance
The FIRE DESTROYER DISK has a useful life of 3 years and does not require additional maintenance during this time.
Safety
The medium is environmentally and human-friendly.
- Due to its shape and size, the FIRE DESTROYER sticker is intended for installation in extremely narrow spaces in the building. The common point of every building is the electrical cabinet, which represents the "heart of electrical installations" inside the building. Due to the increasing dependence on electronic devices, we are becoming increasingly large consumers of electricity, thereby often overloading the capacity of the network and installations within buildings. With the FIRE DESTROYER STICKER product, we can actively protect our electrical network from fire.
- With the FIRE DESTROYER STICKER product, we ensure active fire safety in narrow, hard-to-reach areas where there is a potential for fire. Due to the dimensions of the product and the capacity of the extinguishing medium, it is suitable for rooms up to half a cubic meter. It is suitable for installation in electrical, control and control cabinets, next to batteries, amplifiers...
INSTALLATION
- Simply stick the FIRE DESTROYER sticker on a flat surface and it's ready for a potential firefight. Upon contact with fire, the mechanism is activated within 3-5 seconds and the extinguishing medium is dispersed throughout the room. With the product FIRE DESTROYER STICKER, we ensure active fire safety in narrower, more difficult-to-access points where there is a potential possibility of fire. Due to the dimensions of the product and the capacity of the extinguishing medium, it is suitable for rooms up to 1m3. It is suitable for installation in electrical, control and control cabinets, next to batteries, amplifiers, computers...
Warnings
- In case of damage, you must replace the fire extinguisher in time.
- There is no need to check the quality of the dry powder during the validity period.
- Fire extinguishers do not require maintenance and are valid for 3 to 5 years.
- Do not expose the fire extinguisher to water sources during the standby phase to avoid damaging the fire extinguisher mechanism.
- Install the device 10-50 cm from a potential source of fire.
Customer reviews
Frequently Asked Questions
KROGLA FIRE DESTROYER is intended for all rooms where there is a possibility of direct or indirect fire.
Direct Fire: thermal and heating bodies, sparks, overheating of installations, ignition of flammable substances
Indirect fire: external influences such as lightning and earthquakes, chemical reactions
- Extinguishing media (powder harmless to humans and nature)
- The shell of the ball
- Ignition tape
- Moisture protection
- Additional overlay protection
The extinguishing medium in KROGLA is a composite consisting of the chemical formula NH4H2PO4 and is harmless to humans and nature.
On the ceiling: The KROGLA product has a buckle at the top. Simply hang the ball over a potential source of fire or over objects of greater value.
On the wall: The product comes with all the material for attaching it to the wall (ball stand, screw inserts and screws)
On a flat surface: A stand is included, which you place on a table or other flat surface and place the ball in it
NO, handling the FIRE DESTROYER product does not require prior training. Simply place the SPHERE in the room or throw it into the source of the fire when a fire breaks out.
The FIRE DESTROYER BALL is designed to prevent initial fires and prevent major fires from happening at all. The extinguishing power is from 2.5m3 to 12m3.
